From the time the the flooring is manufactured until it reaches our customer, Ellis is committed to ensuring the quality of production, finishing, packaging, transportation, and delivery of our product.  Ellis Engineered Hardwood Flooring warrants against manufacturing defects and has a warranty on all types of flooring.

 

Description:     Vinyl WPC and SPC Laminated Flooring

Woodlike Impact grain Formaldehyde Free Waterproof with Strong Stability. With advanced printing and texturing technologies, it is the best-looking, best-performing vinyl floor plank in the market.

 

Net dimensions:  9/32” (7.0mm) total thickness x 7.2" (182 mm) face width x 48” ' (1220 mm)  lengths. single-strip construction.               

Also available in the following dimensions:

Thickness:  5.5 mm , 6.5 mm, 7.0 mm, 8 mm and on special production in 11.5 mm

Width / Lengths:  6” x 36” / 6” x 48” / 9” x 48” / 12” x 36”

Wear Layer Thickness: 0.3mm or 0.5 mm Wear layer over an WPC or SPC substrate

Backer: Sound absorbing Foam  Rubber EVA/XPE or CORK to 20 Decibels

Core: WPC (Wood Plastic Composite) or SPC (Rigid Core Flooring)  Stone Plastic Composite - main component is lime stone (calcium carbonate) + PVC Powder + Stabilizer

 

Click-Lock System : Unilin Patented

Finish:  Prefinished with 2 layers Treffert brand water-based UV-cured acrylic polyurethane matte finish

Gloss Level: 8-10%

Formaldehyde Emission: E0 (conforms to European Union Emission – virtually formaldehyde free)

Pentachlorophenol Emission: < 5ppm

FloorScore®

Vinyl Tile Flooring Indoor Air Quality Certified to SCS-EC10.3-2014 v4.0  Conforms to the CDPH/EHLB Standard Method v1.2-2017 (California Section 01350), effective April 1, 2017, for the school classroom and private office parameters when modeled as Flooring. Measured Concentration of Total Volatile Organic Compounds (TVOC): Less than/equal to 0.5 mg/m3 (in compliance withCDPH/EHLB Standard Method v1.2-2017) Registration # SCS-FS-03439 Valid from: September 1, 2018 to  August 31, 2019

Pattern Repeat : Print pattern repeat: Plank pattern repeat: Approx. every 1,200mm (39.37in) Approx. 1 plank in every 15 cartons

Peeling Strength of Layers:             EN 431            Pass

 

Shearing force of layers:                 EN 432            Good

 

Residual indentation after static load: EN 433    Mean value 0.01mm

 

Dimension Stability:                        EN 434            Shrinkage 0.002%; curling 0.2mm

           

Flexibility- 10mm mandrel:            EN 435            No damage

Can be used with Underfloor Radiant Heating

Flammability:

• ASTM F2199 – 18  This test method covers the determination of the change in linear dimensions of resilient floor tile/plank products after exposure to heat and reconditioning to ambient temperature.

 

This test method allows one to also measure curling that can occur after a specimen has been exposed to heat and reconditioned back to ambient temperature.

The values stated in inch-pound units are to be regarded as standard. The values are mathematical conversions to SI units that are provided for information only and are not considered standard.

This standard does not purport to address all of the safety concerns, if any, associated with its use.

• Resistance to Fire: NFPA Class B

 

WPC - Wood Plastic/ polymer Composite.

WPC is a composite material made of thermoplastics, calcium carbonate and wood flour. Extruded as a core material, it is waterproof, rigid and dimensionally stable, and can go over most subfloors without much preparation. The rigid core hides subfloor imperfections. In addition, the rigid core allows for longer and wider formats. With WPC, it is not necessary to worry about the preparation LVT would require for use over cracks and divots in concrete or wooden subfloors.

The vinyl wear layer of WPC provides cushion and comfort and also absorbs the impact sound to make it a quiet floor. WPC is also suitable for large open areas (basements and Main Street commercial areas) because it doesn’t need expansion moldings.

 

Limited Warranty

 

Ellis Luxury SPC Vinyl Flooring carries a Limited Lifetime Warranty on Residential Wear – Limited Lifetime Structural Warrant -10 Year Limited Commercial Warranty. The warranty is not transferable and extends only to the original purchaser. This limited warranty applies only where the affected area is visible and covers an area greater than one square inch. The flooring must be installed in accordance with Ellis’s recommended installation instructions. This limited warranty shall not apply to damage arising from any of the following:

•  Accidents, abuse or misuse - Exposure to extreme heat - Scratch, impact, or cutting - Improper installation Improper care and maintenance - Water damage resulting from improper installation or flooding caused by natural disaster, plumbing failures, etc. - Damage due to failure to use appropriate chair pads  under caster desk chairs (Use only seamless plastic caster wheels to help prevent scratches) Damage resulting from subfloor conditions

​